VLBS Welding Block

Posted on:

Welding Block ASK-VLBS

The welding block is forged out of the material 1.0577+N (St 52-3) and is marked with the identification number of the permissible nominal WLL.

The patented distance lugs have a distance measurement function for the required spacing to the root weld (approximately 3 mm).

Welding should be carried out by a qualified person according to EN 287-1.

The chosen welding point must be suitable for the corresponding force introduction.

Separate welding instructions for the welding procedure and filler metals are supplied with the VLBS.

VLBS Ring

Posted on:

Lifting Ring D-VLBS

Forged load ring according to EN 1677-1.

100% electromagnetic crack detected.

Pink powder coated.

Meets the approval requirements of the respective employer’s liability insurance association.

VLBS Load Ring Welded

Posted on:

Load Ring VLBS-U with spring

An enhancement of the well-established LBS with an up to 50% increment of the WLL!

The new VLBS ring bracket is forged out of the high strength material CrNiMo with 2 patented inner supporting lugs, facilitates easy hooking-in of suspensions and offers better protection of the clamping springs. Given an inclined or a non-parallel work piece, the support effect is extremely improved.

The pink coated ring bracket is manufactured and tested according to EN 1677-1. The welding block is forged out of a good welding material 1.0577+N (St 52-3).

A protected spring keeps the ring bracket in every required position without tipping, and it also reduces vibration induced noise. The parts are captively held together.

Load Ring VLBS without spring

An enhancement of the well-established LBS with an up to 50% increment of the WLL!

The new VLBS ring bracket is forged out of the high strength material CrNiMo with 2 patented inner supporting lugs.

It provides an optimal sitting of the hook and offers better protection for the clamping springs.

Given an inclined or a non-parallel welding surface, the support effect is extremely improved.

Pink powder coating: both a VIP identification charachteristic and a heat indicator.

The pink coated ring bracket is manufactured and tested according to EN 1677-1. The welding block is forged out of a good welding material 1.0577+N (St 52-3).