Socket Wrench for Starpoint VRS

The safety against the disengaging of the bolt connection of lifting points is mainly influenced by the torque of the bolt.

Lifting points, which permanently remain on the point of the force introduction, must be tightened according to the corresponding user manual.

For permanent use, the lifting points for bolting must be checked regularly for tightness.

The cranked socket wrench for the Starpoint-Vario-eye bolt enables an easy tightening with a suitable torque.

# Observe the user manual for Starpoint VRS and socket wrench.
# Socket wrench is nickel-plated, therefore also suitable for INOX-STAR.

Bolts 10.9 magnetically crack tested –
Shortening Fee

100% crack detected hexagon head and socket bolt for the assembly of the VLBG.

The hexagon socket bolt is with a snap ring so that it can be captively mounted with the VLBG.

Adaptor ASPA

Thread adapters should only be used as a reducer for already existing threads to allow the attachment of high tensile RUD lifting points.

The thread adapters are marked with the inside and outside thread diameters.

Attention: never use DIN 580 or standard type eye bolts in combination with RUD thread adapters!

The WLL of the adapter is matched to the WLL of the RUD lifting point.

The thread adapter provides spanner flats for a wrench, a groove for a hook spanner, and a hole for an assembly pin.